T-slot aluminium, brought to everyone
The modular system behind advanced robotics, jigs and rigs — now cut to your size and built by your own hands. Tell us the size and what you'll store; we'll work out every profile, bracket and screw, and send you a quote. Be proud of what you build.
What would you like to build?
Pick a design to start — sizes and options come next. Need something different? WhatsApp us and we'll design it with you.
How big should your rack be?
Measure the space where the rack will stand. All sizes are in millimetres — 1000 mm is 1 metre. Start from a preset if you're not sure.
Tip: standard doorways are about 2,000 mm tall — keep the rack under that if you'll ever need to move it.
Live preview — updates as you type
How big should your workbench be?
Measure your space and your working height. All sizes are in millimetres — 1000 mm is 1 metre.
Tip: stand relaxed and measure to your elbow — that's your ideal worktop height.
Live preview — updates as you type
How big should your trolley be?
Height is measured to the top shelf — the push handle adds about 150 mm. Check it fits your aisles and doorways.
Castor height (~125 mm) is included in the height you enter.
Live preview — updates as you type
Size your gates
Give us the clear opening people or equipment pass through — the frame sits outside these measurements. All sizes in millimetres.
Ordering several lanes? Set the quantity — every part and the cutting plan multiply automatically.
Live preview — updates as you type
Shelves and strength
The top of the rack is always a usable surface. Shelves are spaced evenly between the floor and the top.
A rough guide — our engineers double-check every order before we cut.
Live preview — updates as you choose
Set up your workbench
Choose how sturdy it needs to be and what goes underneath.
Shelves are spaced evenly between the floor and the worktop.
Drawer pull-outs on Blum-style runners are coming soon — WhatsApp us if you'd like them quoted now.
Live preview — updates as you choose
Set up your trolley
Shelves, handle and wheels — everything rated for a moving load.
2 levels, counting the top surface.
Live preview — updates as you choose
Set up your gates
We pick the profile from your span — override it if you know what you want. 40 and 45 families only.
Live preview — updates as you choose
Here's your rack
Check the details, then send it to us — we'll reply with a price, usually within one working day.
Your design
What goes into it
Comfortable with the technical details? Open this design in the full BOM calculator
T-Slot Racking BOM Calculator
Full control over profile, hardware and cutting parameters. Prefer a simpler flow? Use Build a Rack instead.
Rack dimensions (overall)
Hardware
Cutting parameters
Rack preview
Linear Cut Optimiser
Plan the most efficient way to cut lengths of profile, pipe, bar or timber from your stock. Enter what you have and what you need — we'll minimise the waste.
Material lost per cut
Offcuts this long count as usable, not waste
| # | Length | Qty (blank = unlimited) | Label | Remove |
|---|
| # | Length | Qty | Label | Remove |
|---|
Sheet Cut Optimiser
Nest rectangular panels onto stock sheets — aluminium sheet, plywood, acrylic or plate — and see exactly how to cut each one.
| # | Length | Width | Qty (blank = unlimited) | Label | Remove |
|---|
| # | Length | Width | Qty | Label | Remove |
|---|